XenonRider.com - Xenon Rider Automotive Xenon & Bi-Xenon HID (High Intensity Discharge) Headlight Conversion Kits for Cars & Motorcycles

XenonRider.com - Xenon Rider Automotive Xenon & Bi-Xenon HID (High Intensity Discharge) Headlight Conversion Kits for Cars & Motorcycles

Xenon HID
Conversion Kits

Bi-Xenon HID
Conversion Kits

Replacement Parts

Hi/Lo Installation Instructions
H4/H13/9004/9007

Please Note: Due to the unique headlight housings of certain vehicles, some installation may require more work than others. In certain installations, removal of the bumper and/or headlight housings may be necessary. Please refer to your service manual for details.

1) Clean all connectors and wipe the HID bulbs and connectors with rubbing alcohol
2) Install the HID bulbs into the headlight housing
3) Connect the HID bulbs to the ballast (2 round quick-disconnects)
4) Connect the high beam control wires (small rectangular connectors)
5) Connect the ballasts to the Hi/Lo wiring harness (oval connectors with yellow rubber seals)
6) Connect the 3-pin socket on the wiring harness to ONE of the headlight sockets
7) Connect the thick red wire to the battery positive
8) Connect the thick black wires to the battery negative or ground
9) Mount the ballast and clean up the wiring harness with zip ties
" Do not drill holes on the ballast box
" Mount away from moving components
" Mount to a secure location
10) Turn headlight switch on and allow your new xenon light to run for 10 minutes
11) You're done! Enjoy!

 
XenonRider.com - Xenon Rider Automotive Xenon & Bi-Xenon HID (High Intensity Discharge) Headlight Conversion Kits for Cars & Motorcycles

Copyright 2006-2014 XenonRider.com
Home | HID Benefits | FAQ | Help | Installation | Warranty | Contact Us