XenonRider.com - Xenon Rider Automotive Xenon & Bi-Xenon HID (High Intensity Discharge) Headlight Conversion Kits for Cars & Motorcycles
|
LED Lighting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
City/Driving
Light LED
|
|
|
|
|
|
|
|
|
|
Accessories
|
|
|
|
|
|
|
|
|
|
|
|
Load
Resistor - 6 Ohm, 50 Watt
|
|
Sale Price: $4.99
|
Description:
Load Resistor used for mini wedge LED bulbs. Simulates the load
of a standard bulb. Connect in parallel to the LED bulb to resolve
turn signal problems (hyper flashing, no flashing
or burnt-out warning). Aluminum heatsink for One resistor required
for each bulb. Kit includes splice taps for installation.
Connection Instructions: Using
included splice taps, connect one wire from the resistor to
the ground wire and the other wire to the positive wire. You
do not have to cut your car's wiring. Squeeze splice taps with
pliers. One Load Resistor required for each bulb. No additional
instructions are included with these kits.
CAUTION! this Load resistor
gets extremely hot and needs to be installed correctly. The
flat surface of the resistor needs to make a good secure contact
on a clean flat metal surface on your car or motorcycle. This
will act as a heat sink which should keep the Load resistor
cooler. Keep this Load resistor away from oil, making contact
with skin, plastic, wires and combustible gases and material.
|
|
|
Load
Resistor - 25 Ohm, 25 Watt
|
|
Sale Price: $3.99
|
Description:
Load Resistor used for mini wedge LED bulbs. Simulates the load
of a standard bulb. Connect in parallel to the LED bulb to resolve
bulb-out warning indicator problems. One resistor
required for each bulb. Kit includes splice taps for installation.
Connection Instructions: Using
included splice taps, connect one wire from the resistor to
the ground wire and the other wire to the positive wire. You
do not have to cut your car's wiring. Squeeze splice taps with
pliers. One Load Resistor required for each bulb. No additional
instructions are included with these kits.
CAUTION! this Load resistor
gets extremely hot and needs to be installed correctly. The
flat surface of the resistor needs to make a good secure contact
on a clean flat metal surface on your car or motorcycle. This
will act as a heat sink which should keep the Load resistor
cooler. Keep this Load resistor away from oil, making contact
with skin, plastic, wires and combustible gases and material.
|
|
|
